FREE Domestic Shipping on all items. No minimums. 100% Satisfaction Guarantee!
CBD stands for cannabidiol, which consists of 85 compounds of cannabis. When rich oil is extracted from hemp plants or marijuana, you will get CBD oil.
Many people prefer CBD oil to other types of oil for various beneficial reasons. The desire to relax after enduring a full and long day and the desire for a general state of wellness enhancement are some of the most common reasons people use CBD oil. And as a result, CBD oil is becoming more popular as an alternative to soothe the senses and to use it as a supplement.
THC stands for tetrahydrocannabinol. This is the main ingredient in the cannabis plant that alters the mind. However, CBD possesses a plethora of opposite effects of THC. And so, CBD has gotten more attention over the recent years. Furthermore, CBD is legal, but THC is still legally restrained in most areas.
On the other hand, hemp is produced by having the lowest THC concentrations and the highest CBD concentrations. Medical marijuana is specifically grown for its high content of THC. And due to this, people are obtaining oil that is high in CBD with very minor amounts of THC. And as a result, CBD hemp oil is incapable of causing the psychotropic effects of THC.
Now, that you got the gist of what CBD is and its benefits, it’s time to proceed to how to make CBD oil. There are three methods you can use to make this oil:
You can make CBD oil in its purest form by using low temperatures and high pressures to push CO2 through the plant. This process is usually considered the safest and best method as it extracts CBD in a clean matter that removes substances, such as chlorophyll. It also leaves no residue. This method is more expensive than other methods, but you will have CBD oil extraction that has a cleaner taste compared to other methods.
This high grain alcohol can extract CBD oil from the plant. No advanced equipment or special skills are required which makes it a good choice for beginners. Another great aspect of this method is that an unpleasant odor or taste is not left as opposed to other methods. However, some of the beneficial natural oils are destroyed.
With this method, you must start by placing marijuana in a glass or ceramic bowl. Pour alcohol in the bowl until it covers the marijuana. Then, stir it for approximately six minutes. Afterward, extract the produced resin with a wood spoon.
Then, filter out the solvent by putting a straining bag in the bowl. Squeeze the oil extraction as much as possible. If you must repeat the squeezing to get as much as possible, please do that.
Then, pour the extracted oil in a double boiler and heat it until bubbles began to form, so alcohol will evaporate without the rise in the temperature. Let the oil simmer for around 30 minutes on a very low flame. When the alcohol completely evaporates, mix it and turn the flame off. And when it cooled down, put the concentrated extract oil into a storage bottle with a secured lid in a dry, cool, and dark place.
This method is becoming more popular. With this method, you will use a carrier oil, the most commonly used being olive oil. This method is increasing in popularity due to the nutritional benefits of olive oil, its safety, and no existence of unwanted residue.
To begin the process, you must choose a high-quality cannabis plant for the cannabis plant’s leaves, stems, and buds. You must ensure the raw cannabis has undergone the decarboxylation process. This is done by baking the leaves and buds at an approximate temperature of 220 degrees Fahrenheit for 90 to 100 minutes. This process is vital to activate the chemicals of the plant. Then, you must mix the grounded weed with the oil in a mason jar and saturate the weed with the oil. You can decide the quantity of oil according to how potent you want the end result to be.
When saturation occurs, you must bring the oil and weed mixture to a boil. Screw the mason jar’s lid to securely ensure that no water or steam enters the oil mixture.
Then, place a towel at the bottom of the pan. Put the mason jar on the top and fill the pan with water until it at least 200 degrees in temperature. A thermometer must be used.
Checking the pot regularly is mandatory to ensure the water has not evaporated. After letting the oil mixture simmer for three hours, turn off the stove and let it sit for an additional three hours.
After this process, you should heat the oil mixture again for three hours, turn off the heat, and leave it there overnight. You can use the CBD oil by the next morning. Just strain the mixture through a cheesecloth and store it in a dark cook, and dry place.
Many people prefer CBD oil for various beneficial reasons. The desire to relax after enduring a full and long day and the desire for a general state of wellness enhancement are some of the most common reasons people use CBD oil.
CBD possesses a plethora of opposite effects of THC. And so, CBD has gotten more attention over the recent years. Furthermore, CBD is legal, but THC is still legally restrained in most areas.
There are three methods you can use to make this oil, and they are the oil method, alcohol method, and the CO2 method. Each method has its pros and cons. And thus, the method you choose is up to you. Nevertheless, once you make this oil, you can sit back and enjoy the benefits that CBD oil provides.
All products contain less than 0.3% THC.